NEW!  Version 3 of iPi Motion Capture is available. iPi Motion Capture 3 delivers new features for improved workflow including support of Kinect 2, improved arms tracking, simplified calibration and others. Read more >>

This documentation corresponds to version 2 of iPi Motion Capture. The latest documentation for version 3 can be found at https://docs.ipisoft.com/

Animation export and motion transfer

From iPiSoft Wiki
Revision as of 10:43, 19 February 2019 by Pavel (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Use File > Export Animation menu item to export all animation frames from within Region of Interest (ROI).

To export animation for specific take, right-click on take and select Export Animation item from pop-up menu.

Contents

Default iPi Character Rig

The default skeleton in iPi Mocap Studio is optimized for markerless motion capture. It may or may not be suitable as a skeleton for your character. Default iPi skeleton in T-pose has non-zero rotations for all joints. Please note that default iPi skeleton with zero rotations does not represent a meaningful pose and looks like a random pile of bones.

Default rig
Bone names

By default iPi Mocap Studio exports a T-pose (or a reasonable default pose for custom rig after motion transfer) in the first frame of animation. In case when it is not desired switch off Export T-pose in first frame checkbox.

Motion Transfer and Custom Rigs

iPi Mocap Studio has integrated motion transfer technology. You can import your character into iPi Studio via File > Import Target Character menu item and your motion will be transferred to your character. You may need to assign bone mappings on the Export tab for motion transfer to work correctly. You can save your motion transfer profile to XML file for future use. iPi Mocap Studio has pre-configured motion transfer profiles for many popular rigs (see below). If you export animation to format different from format your target character was imported in, only rig will be exported. If you use the same format for export, skin will be exported as well.

MotionBuilder

Use the Export Animation for MotionBuilder menu item to export your motion in MotionBuilder-friendly BVH format. MotionBuilder-friendly skeleton in T-pose has zero rotations for all joints, with bone names consistent with MotionBuilder conventions. This format may also be convenient for use with other apps like Blender.

3D MAX Biped

Use the Export Animation for 3D MAX menu item to export your motion in 3D MAX-friendly BVH format.

Create a Biped character in 3D MAX (Create > Systems > Biped). Go to Motion tab. Click Motion Capture button and import your BVH file.

Step 1
Step 2
Step 3
Step 4

Our user Cra0kalo created an example Valve Biped rig for use with 3D MAX. It may be useful if you work with Valve Source Engine characters.

Maya

Latest versions of Maya (starting with Maya 2011) have a powerful biped animation subsystem called "HumanIK". Animations exported from iPi Mocap Studio in MotionBuilder-friendly format (the Export Animation for MotionBuilder menu item) should work fine with Maya 2011 and HumanIK. The following video tutorials can be helpful:

For older versions of Maya please see the #Motion Transfer and Custom Rigs section. Recommended format for import/export with older versions of Maya is FBX.

FBX

iPi Mocap Studio supports FBX format for import/export of animations and characters. By default, iPi Mocap Studio exports animations in FBX 6.0 format using FBX SDK 2012. If your target character is in FBX 7.0 or newer format, iPi Mocap Studio will export retargeted animation in FBX 2012 format.

Some applications do not use latest FBX SDK and may have problems importing newer version FBX files. In case of problems, your can use Autodesk's free FBX Converter to convert your animation file to appropriate FBX version.

COLLADA

iPi Mocap Studio supports COLLADA format for import/export of animations and characters. Current version of iPi Mocap Studio exports COLLADA animations as matrices. In case if you encounter incompatibilities with other applications' implementation of COLLADA format, we recommend using Autodesk's free FBX Converter to convert your data between FBX and COLLADA formats. FBX is known to be more universally supported in many 3D graphics packages.

LightWave

Recommended format for importing target characters from LightWave to iPi Studio is FBX. Recommended format for bringing animations from iPi Mocap Studio to LightWave is BVH or FBX.

SoftImage|XSI

Our user Eric Cosky published a tutorial on using iPi Mocap Studio with SoftImage|XSI:

http://www.ipisoft.com/forum/viewtopic.php?f=13&p=9660#p9660

Poser

Export your poser character in T-pose in BVH format (File > Export). Import your Poser character skeleton into iPi Mocap Studio (File > Import Target Character). Your animation will be transferred to your Poser character. Now you can use File > Export Animation to export your animation in BVH format for Poser.

Poser 8 has a bug with incorrect wrists animation import. The bug can be reproduced as follows: export Poser 8 character in T-pose in BVH format; import your character back into Poser 8; note how wrists are twisted unnaturally as the result.

A workaround for wrists bug is to chop off wrists from your Poser 8 skeleton (for instance using BVHacker) before importing Poser 8 target character into iPi Mocap Studio. Missing wrists should not cause any problems during motion transfer in iPi Mocap Studio if your BVH file is edited correctly. Poser will ignore missing wrists when importing resulting motion so the resulting motion will look right in Poser (wrists in default pose as expected).

Step 1
Step 2
Step 3
Step 4

DAZ 3D

The workflow for DAZ 3D is very similar to Poser. Import your DAZ 3D character skeleton into iPi Mocap Studio (File > Import Target Character). Your animation will be transferred to your DAZ 3D character. Now you can use File > Export Animation to export your animation in BVH format for DAZ 3D.

IMPORTANT: You can use DAZ character in COLLADA (.dae) format for preview, but it is strongly recommended that you use DAZ character in BVH format for motion transfer. DAZ3D has a problem with COLLADA (.dae) format: DAZ3D Studio does not export all bones into COLLADA (.dae). In particular, the following bones are not exported: eyeBrow, bodyMorphs. DAZ3D Studio does not use bone names when importing motions; instead, DAZ3D Studio just takes rotations from the list of angles as though it was a flat list with exactly the same positions as in DAZ3D internal skeleton. As the result, when you transfer the motion to a COLLADA character and import it back into DAZ3D, the motion will look wrong. iPi Mocap Studio displays a warning about this. To avoid this problem, import your DAZ target character in BVH format - DAZ3D Studio is known to export characters in BVH format correctly (with all bones).

You can improve accuracy of motion transfer by doing some additional preparation of your DAZ 3D skeleton in BVH format. For DAZ 3D Michael 4.0 and similar characters, you may need to clamp thigh joint rotation to zero to avoid unnatural leg bending. For DAZ 3D Victoria 4.0, you may need to adjust foot joint rotation to change the default “high heels“ foot pose to a more natural foot pose.

Step 1
Step 2
Step 3
Step 4
Step 5

iClone

Current version of iPi Studio can only export animation in iClone-compatible BVH format. The iMotion format is not supported as of yet. That means you will need iClone PRO to be able to import the motion into iClone. Standard and EX versions of iClone do not have BVH Converter and therefore cannot import BVH files.

Workflow for iClone is straightforward. Export your animation using Export Animation for iClone menu item. Go to Animation tab in iClone and launch BVH Converter. Import your BVH file with Default profile, click Convert and save the resulting animation in iMotion format. Now your animation can be applied to iClone characters.

iClone expects an animation sampled at 15 frames per seconds. For other frame rates, you may need to create a custom BVH Converter profile by copying Default profile and editing Frame Rate setting.

BVH Converted in iClone 4 has a bug that causes distortion of legs animation. iPi Mocap Studio exports an iClone-optimized BVH correctly as can be verified by reviewing exported BVH motion in BVHacker or MotionBuilder or other third-party application. No workaround is known. We recommend that you contact iClone developers about this bug as it is out of control of iPi Soft.

Step 1
Step 2
Step 3
Step 4
Step 5

Valve Source Engine SMD

Import .smd file for your Valve Source Engine character into iPi Mocap Studio via File > Import Target Character menu item. Your animation will be transferred to your character. Now you can use File > Export Animation to export your animation in Valve Source Engine SMD format.

Our user Cra0kalo created an example Valve Biped rig for use with 3D MAX. It may be useful if you wish to apply more then one capture through MotionBuilder or edit the custom keyframes in MAX.

Valve Source Filmmaker

DMX

First, you need to import your character (or its skeleton) into iPi Mocap Studio, for motion transfer.

There are currently 3 ways of doing this:

  1. You can import an animation DMX (in default pose) into iPi Mocap Studio. Since it has a skeleton, it should be enough for motion transfer. To create an animation DMX with default pose, you can add your character to your scene in Source Filmmaker and export DMX for corresponding animation node:
    • open Animation Set Editor Tab;
    • click + > Create Animation Set for New Model;
    • choose a model and click Open;
    • export animation for your model, in ASCII DMX format;
      There is a checkbox named Ascii in the top area of the export dialog.
  2. Alternatively, you can just import an SMD file with your character into iPi Mocap Studio. For example, SMD files for all Team Fortress 2 characters can be found in your SDK in a location similar to the following (you need to have Source SDK installed): C:\Program Files (x86)\Steam\steamapps\<your steam name>\sourcesdk_content\tf\modelsrc\player\pyro\parts\smd\pyro_model.smd).
  3. If you created a custom character in Maya, you should be able to export it in DMX model fromat. (Please see Valve documentation on how to do this).

Then you can import your model DMX into iPi Mocap Studio. Current version of iPi Mocap Studio cannot display character skin, but it should display the skeleton. Skeleton should be enough for motion transfer.

To export animation in DMX, you should just use General... export menu item in iPi Mocap Studio and choose DMX from the list of supported formats. You may also want to uncheck Export T-pose in first frame option on the Export tab in iPi Mocap Studio.

Now you can import your animation into Source Filmmaker. There will be some warnings about missing channels for face bones but you can safely ignore them.

Step 1
Step 2
Step 3
Step 4
Step 5
Step 6

Old way involving Maya

This was used until iPi Mocap Studio got DMX support. And still may be useful in case of any troubles with DMX. Please see the following video tutorial series:

http://www.youtube.com/playlist?list=PLD4409518E1F04270

Blender

iPi Mocap Studio can export animations in Blender-friendly BVH format. For latest versions of Blender, you can use the MotionBuilder-compatible BVH export option. For Blender version 2.59 or older you can use the Blender 2.59 or older export option.

Cinema4D

If you have experience with Cinema4D please help to expand this Wiki by posting Cinema4D import/export tips to Community Tutorials section of our user forum.

Evolver

iPi Mocap Studio supports importing of skinned Evolver characters in COLLADA or FBX format. Import your Evolver character skeleton into iPi Mocap Studio (File > Import Target Character). Your animation will be retargeted to your Evolver character. Now you can use File > Export Animation to export your animation.

Evolver offers several different skeletons for Evolver characters. Here is an example motion transfer profile for Evolver "Gaming" skeleton: evolver_game.profile.xml

Evolver example.jpg

Second Life

Import your Second Life character skeleton into iPi Mocap Studio (File > Import Target Character). Your animation will be transferred to your Second Life character. Now you can use File > Export Animation to export your animation in BVH format for Second Life.

SecondLife documentation contains a link to useful SL avatar files. The ZIP file includes a BVH of the "default pose". Be sure to have that.

See the discussion on our Forum for additional details: http://www.ipisoft.com/forum/viewtopic.php?f=2&p=7845

Massive

Please see our user forum for a discussion of animation import/export for Massive:

http://ipisoft.com/forum/viewtopic.php?f=12&t=3233

IKinema WebAnimate

Please see the following video tutorial on how to use iPi Mocap Studio with IKinema WebAnimate:

http://www.youtube.com/watch?v=a-yJ-O02SLU

Jimmy|Rig Pro

Please see the following video tutorial on how to use iPi Mocap Studio with Jimmy|Rig Pro:

http://www.youtube.com/watch?v=wD1keDh3fCk

Personal tools