Biomechanical Analysis

Introduction

Starting from version 2.6, iPi Mocap Studio includes iPi Biomech Add-on.

iPi Biomech Add-on is a convenient tool for in-depth biomechanical analysis of human motions. It includes visualization of tracking data and its export to various formats. It can be used for:

• Gait analysis and rehabilitation
• Sports motion analysis
• Research in 3D human kinematics

Markerless tracking technology does not require clumsy suits, and work in real-life environments like regular office.

With iPi Biomech Add-on you can: Get Linear and Angular Quantities for selected bones, including Linear coordinate, velocity, acceleration Euler angles, angular velocity and angular acceleration Quaternions and Rotation matrices Select convenient coordinate systems Linear: Absolute (relative to floor), Relative to parent joint, Relative to center of mass Angular: Absolute (relative to floor), Relative to parent joint Select Euler angles system Plot values of selected Quantities for selected bones Export bones motion data to file Tab-separated text format (for Excel) MATLAB format Export point clouds obtained from depth sensors to file PCD format MATLAB format

Note. iPi Biomech Add-on requires separate license key, which you need to activate in addition to iPi Mocap Studio license key. 30-days free trial provided.

Glossary

Linear quantities

Quantities derived from linear coordinate of the joint which connects bone to it's parent bone, including:

• Coordinate
• Velocity
• Acceleration

Angular quantities

Quantities derived from bones's Euler angle, including:

• Euler angle
• Angular velocity
• Angular acceleration
• Quaternions
• Rotation matrices

Linear coordinate system

Coordinate system used for linear quantities, can be:

• Absolute (relative to ground) — axes are shown by selecting Move tool; center is automatically set during calibration (it's z-coordinate is always 0)
• Relative to center of mass — axes are shown by selecting Move tool; center is in the actor model's center of mass
• Relative to parent joint — axes are shown by selecting Move tool; center coincides with the coordinates of the parent bone

Angular coordinate system

Coordinate system used for angular quantities, can be:

• Absolute (relative to ground) — in this system rotations are defined relative to ground
• Local (Relative to parent bone) — in this system rotations are defined relative to the parent bone

Euler angles system

Set of rotations which defines Euler angles, see here

Unit

Measurement unit of physical quantity

License and Trial

iPi Biomech Add-on requires separate license key, which you need to activate in addition to iPi Mocap Studio license key. You can order your license here, or activate 30-days free trial. As soon as you install (or auto-update to) version 2.6 or higher, Biomech tab will appear in iPi Mocap Studio control panel. Follow the steps below to start working with iPi Biomech Add-on

1. Switch to Biomech tab.
2. Press Activate button
3. Press Start 30-days Free Trial Period or Enter Biomech License Key and follow further on-screen instructions

   

Note. If you do not have iPi Mocap Studio license key, you can order it here or activate 30-days free trial. If your Studio trial has expired, you will not be able to export biomech data as well as animation. But you can still plot biomech data.

Select Data for Analysis

First you need to select data that you will analyze

1. Select bones
   • (1) Check corresponding bones to include them in analysis
   • (2) On the top of the list you can see "special" bones — Center of mass, Center of mass projection to the ground. The rest of the list are the bones from the internal iPi rig.
   • (3) You can include finger bones into analysis by expanding hand bone (RHand and / or LHand). However, fingers are not tracked due to insufficient resolution of off-the-shelf cameras, so they just keep attached to hand joint (RHand or LHand), remaining in default position related to hand
   • (4) You can select all bones by clicking to the checkbox in the header. Fingers will be included only if the hand bone is expanded.
   • (5) You can change bones listbox height using splitter at the bottom.

   

2. Select linear quantities for analysis
3. Select output units for each quantity
4. Select linear coordinate system
5. Select angular quantities for analysis
6. Select output units for each quantity
7. Select angular coordinate system
8. Select Euler angles system

   

Plot Data

You can plot values of the selected quantities for the selected bones within the Region-of-Interest (except Quaternions and Rotation matrices, as it makes no sense to see them on plots due to their physical meaning).

1. Select the Region-of-Interest
2. Press Plot Selected Data button

   Plot window will be opened. If it is already opened it's contents will be updated. In the Plot window you see bones in rows and quantities in columns. Plot controls:

3. Plot controls button shows plot control keys (focus should be set to Plot window).

   Mouse wheel — zoom in / out for the horizontal axis

   'Page Up' key — zoom in for the horizontal axis

   'Page Down' key — zoom out for the horizontal axis

   Right mouse button drag over plots — horizontal shift of all plots

   Left mouse button drag over table header title — change columns order

   'Right arrow' key — shift all plots to the left

   'Left arrow' key — shift all plots to the right

   Left mouse key click — show plot values for particular frame

   'A' key — cancel zoom and shift, restore initial state of all plots

4. Reload plot data reloads plot's data. Useful when selection of bones, quantities, Region-of-Interest changed or any tracking / refined / filtering applied to motion data. You will get the same effect if you press Plot button.
5. Scroll to current frame button shifts all plots along horizontal axis, in order to make current frame visible in the plot area. Nothing happens, if current frame is already visible on plots.
6. Show / hide series button allows to select particular components of the corresponding quantity that will be shown on graph.

   

Export Motion Data

To export values of the selected quantities for the selected bones within the Region-of-Interest:

1. Select the Region-of-Interest
2. Press Export Selected Data button
3. Select export option:
   • Tab-separated text file: text format easily importable to Excel. Header will contain information on parameters such as coordinate systems and units
   • Copy to clipboard / paste to Excel: text data will be copied to clipboard. You just need to open empty Excel sheet and paste data to it. Information on parameters such as coordinate systems and units will be in the top rows.
   • MATLAB file: binary file in MATLAB format.

   

Export Point Cloud

To export point cloud captured with depth sensors within the Region-of-Interest:

1. Select the Region-of-Interest
2. Select the cameras you want to export point cloud from (if you select several cameras, you will get one aggregate point cloud)
3. Turn on / off background subtraction (if checked, background will not be included in point cloud)
4. Turn on / off RGB export (if checked, color information will be added to points)
5. Press Export Selected Data button
6. Select export option:
   • One point cloud from current frame (PCD): export single point cloud from the current frame to a file in PCD format
   • All frames of ROI (multiple PCD files): export multiple point clouds (one point cloud from each frame of the Region-of-Interest) to PCD format, each point cloud is saved to a separate file
   • One point cloud from current frame (MAT): export single point cloud from the current frame to a file in MATLAB format
   • All frames of ROI (MAT): export multiple point clouds (one point cloud from each frame of the Region-of-Interest) to a file in MATLAB format

   

Biomech Export Profile

You can save all interface settings (1) to an XML file, and later load them from the file (2). It is useful if you work with several projects that require to analyze different bones and / or quantities. The following settings are stored:

• Selected bones, bones list view height
• Selected quantities, coordinate systems, euler angles system, units
• Settings of point cloud export
• Plot window settings (order on columns, visible series, window size and position)